Contact your sales representative and clerk
Product datasheets and safety data sheets
Overview of product stock availability
Educational materials
News about industrial seals
Information on new products and services
Exclusive hints and tips
Carbon dioxide is a naturally occurring, colourless and odourless gas. It is a by-product of the metabolism of living organisms and is also released into the atmosphere by the burning of fossil fuels. Dry carbon dioxide is carbon dioxide from which water vapour has been removed. This process is often carried out to remove impurities and increase the CO2 concentration for specific industrial or laboratory applications. It is used for the production of carbonated beverages, dry ice, as a refrigerant and in food preservation, as a reagent in industrial processes such as the production of fertilisers, methanol and urethanes, it is also used in the oil and gas industry for enhanced oil recovery and as a raw material for the production of chemicals such as formic acid and oxalic acid.
Molecular formula
CO2
Filter
Fibre-rubber plates
Excellent suitable
Excellent suitable
Excellent suitable
Not known Not known
Excellent suitable
Teflon plates
Excellent suitable
Excellent suitable
Excellent suitable
Excellent suitable
Graphite plates
Excellent suitable
Excellent suitable
Excellent suitable
Excellent suitable
Excellent suitable
Rubber plates
Good good
Good good
Good good
Good good
Excellent suitable
Not known Not known
Good good
Good good
Good good
All technical data is based on our measurements and experience and is for guidance only. The parameters listed interact if they occur together and must be consulted in limiting cases. The manufacturer is not liable for misinterpretation of the given data and incorrect application of seals
Sealing plate made of aramid fibres with NBR binder. For low pressures and temperatures.
Sealing plate made of a mixture of aramid and cellulose fibres with NBR binder. For medium pressures and temperatures.
Sealing plate made of a mixture of aramid fibers with NBR binder. For medium to high pressures and temperatures.
Sealing plate made of graphite and carbon fibre with NBR binder. For the highest pressures and temperatures.
Sealing plate made of restructured 100% "virgin" PTFE reinforced with hollow glass microspheres against cold creep.
Sealing plate made of restructured 100% "virgin" PTFE reinforced with silica filler against cold creep. For high pressures and temperatures.
Sealing plate made of restructured 100% "virgin" PTFE reinforced with selected inert fillers against cold creep.
Sealing plate made of multidirectionally oriented expanded 100% "virgin" PTFE. Only the thickness changes under load.
Reinforced with bonded smooth Ni foil 0.013 mm thick (material: 2.4066). For low and medium pressures.
Reinforced with 0.1 mm thick perforated reed plate (material: AISI 316). For medium and higher pressures.
Reinforced with 0,05 mm thick stainless steel foil (material: AISI 316). For low and medium pressures.
Reinforced with expanded stainless steel sheet 0.1 mm thick (material: AISI 316L, 700 g/m²). Ideal seal for large pressure changes.
Multilayered sealing material made of expanded graphite reinforced with a larger number of inserts without the use of adhesives. Suitable for higher pressures and temperatures.
Pokorny Industries Partnership in quality
© Pokorny industries s.r.o. 2024 - all rights reserved
Made by servisdesign
You don't know what to do?
